Alpine MRP-M1000 Mono Power Amplifier

Power up your system with Alpine's V-Power amplifiers! This best selling family of amplifiers offers more choices for building the right system for you, and provides flexibility and value in an aggressive design. Alpine continues to bring you mind-blowing sound performance – only the best - so you get the sound you deserve.

CEA-2006 Power Rating
CEA-2006 Power Rating (40hm@14.4V = 1%THD+N), S/N 75dBA (Ref. 1W into 4Ohm):600W x 1

RMS Power (at 14.4V, 20-200Hz)
Per channel into 4 ohms: 600W x 1 (1% THD)
Per channel into 2 ohms: 1000W x 1

FEATURES

Install
* Terminal Layout: Two-Sided
* Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals

General
* Amplifier Type: Class-D (Digital)
* Channel Design: 1 Channel (Mono)
* Thermal Control: Thermal Management Control
* Power Supply: DC-DC PWM Power Supply
* Power Supply Design: MOSFET Power
* Board Circuitry: STAR Circuitry
* Current Protection: Over-Current, Over-Voltage and Thermal Protection
* Power Indicator: Top Mounted Blue LED Power Indicator
* RCA Output: Gold Plated RCA Input Connectors
* Speaker-Level Inputs: Speaker Level Inputs
* Crossover: Adjustable Low-Pass
* Connector Plating: Gold Plated Input, Output, Power and Speaker Terminals
* Board Design: Dual Sided Glass Epoxy PC Board
* Gain Control: Continuously Adjustable Gain Control

SPECIFICATIONS

CEA-2006 Power Ratings
* CEA-2006 Power Rating: (4 I? @14.4V C% THD+N, S/N: 75dBA, ref:1W into 4 I?) 600W x 1

RMS Power Ratings
* Per channel into 4 Ohms: (@ 14.4V C%THD+N, 20Hz - 200Hz) 600W x 1
* Per channel into 2 Ohms: (@ 14.4V C%THD+N, 20Hz - 200Hz) 1000W x 1

Sound Tuning
* Crossover: 50Hz-200Hz, -24dB/oct. (Low-Pass)
* EQ (Equalizer): Bass EQ (Fixed Frequency): 50Hz 0 to +12dB
* Subsonic Filter: 15Hz (Fixed), -24dB/oct.

Dimensions
* Foot Print (WxHxD) mm: 380mm x 60mm x 242mm
* Foot Print (WxHxD) in: 14-31/32'' x 2-23/64'' x 9-33/64''
* Heat Sink (WxHxD) mm: 320mm x 60mm x 242mm
* Heat Sink (WxHxD) in: 12-19/32'' x 2-23/64'' x 9-33/64''

General
* Power Requirements: 14.4V DC (11V to 16V)
* Input Sensitivity: 0.2 - 4.0V
* Frequency Response: 20 -200Hz (200Hz/-3dB)
* Speaker Impedance: 4 or 2 I?
* Signal to Noise: 100dBA