JBL PX600.2 2-Channel Power Amplifier

JBL Updated: 2008-09-14 RSS
JBL PX600.2 2-Channel Power Amplifier

The PX600.2 is an ideal choice if you are looking to deliver clean full range power to a set of great front stage loudspeaker or subwoofers.This amplifier was developed with sonic accuracy in mind delivering ultra-low distortion and exceptional channel separation.

The PX600.2 comes equipped with a slope selectable electronic crossover capable of setting the slope rate at 12dB or 24dB per octave. The additional adjustment will allow you to maximize output power and finely tune the system response to your vehicle.

Full-range preamp outputs - In the event that multiple amplifiers are used in an application, this feature allows for streamlined system hookup. No high-loss Y-adapters or splitteres needed.


Warranty: 1 Year
Power Output: 180 watts RMS x 2 channels at 4 ohms
and ≤ 1% THD + N

290 watts RMS x 2 channels at 2 ohms,
14.4 V supply and ≤ 1% THD + N
Signal-to-Noise Ratio: 79.5 dBA (reference 1 watt into 4 ohms)
Dynamic Power: 714 watts at 4 ohms
Effective Damping Factor: 6.274 at 4 ohms
Maximum Input Signal: 5.95 V
Frequency Response: 10Hz – 97kHz (-3dB)
Maximum Sensitivity: 264 mV
Output Regulation: .056 db at 4 ohms
Dimensions (H x W x D): 2-9/16" x 17" x 12-1/4"