Sennheiser HME 95 Headset

Sennheiser Updated: 2009-01-07 RSS
Sennheiser HME 95 Headset

The HME 95 is a new Headset for General Aviation

Features

* Outstanding transmission quality for clear communications
* Good passive attenuation
* Collapsible design for space-saving storage and transportation
* Noise-compensating boom microphone ensures excellent speech transmission
* Flexible microphone boom arm
* Separate left and right channel volume control
* Peak-Level-Protection safeguards your ears from volume peaks above 110 dB
* Excellent comfort resulting from soft ear pads and headband padding
* Audio-Input facility for external audio sources: mobile phones and MP3-Players

Delivery Includes

* Headset HME 95
* Carrying bag for the headset
* Cable clip
* 2 wind and pop screens
* User manual
* Audio-In cable 0,60 m, 3,5 --> 3,5 mm jacks
* Audio-In cable 0,60 m, 2,5 --> 2,5 mm jacks

Technical Data

Transducer principle: dynamic, closed
Ear coupling: circum-aural
Frequency response (headphones): 8 - 28.000 Hz
Nominal impedance: 225 Ohm mono, 300 Ohm stereo
Sound pressure level (SPL): 100 dB SPL - 1 kHz, 1 V stereo; 97 dB SPL - 1 kHz, 1V mono (passive)
THD, total harmonic distortion: <1 % at 94 dB SPL (300 - 3.000 Hz)
Attenuation (passive): approx. 13 - 34 dB
Contact pressure: approx. 8 N
Transducer principle (Microphone): pre-polarized, electret-condensor, noise-compensated
Frequency response (microphone): 350 - 6.000 Hz
Output voltage: 400 mV at 114 dB SPL / 40 mV/Pa factory pre-set; (adjustable from 17 - 100 mV/Pa)
Operating voltage (stand alone): 8 - 16 V DC
Connection cable: single-sided round cable, length 1.85 m
Connector: 6.3 mm - headphones, 5.25 mm - microphone
Weight w/o cable: approx. 275 g
Operating temperature: -10 °C - +55 °C
Storage temperature: -55 °C - +55 °C