Konica Minolta Drypro Model 832 Laser Imager

Konica Minolta Updated: 2008-12-23 RSS
Konica Minolta Drypro Model 832 Laser Imager

The DRYPRO 832 dry laser imager is more than just a compact printer. It delivers excellent productivity, boasting an unparalleled time to first print of 50 seconds and support of four film sizes - from 14X17 in.; 11X14 in.; 10X12 in. and 8X10 in. This full-spec, "tabletop," laser imager doesn't sacrifice performance or versatility. SD-Q film is required for all DRYPRO's 832 models.

World's fastest first printing time (Data as of March 2007)
Time to first print, a major speed and productivity parameter, has been greatly improved to a short 50 seconds, dramatically enhancing productivity and workflow.

The DRYPRO 832-PC is a variation of the DRYPRO 832 Dry Laser printer that is specifically configured for the low volume, non-hospital, non-GPO affiliated customers. The DRYPRO 832-PC is only configured for use with the new 50-sheet box of PPQ ONLY. The 50-sheet film pack is a new film package size. It is available in 14x17 or 11x14 size, six boxes per case - a total of 300 sheets.

Five film sizes and two trays
Five film sizes are available (14×17in., 11×14 in., 10×12 in., and 8×10 in.,) And by installing an additional film supply tray, two film sizes can be used at the same time, for example, 14×17 in. and 11×14 in., or 14×17 in. and 8×10 in..

The DRYPRO 832 is very user friendly. It is easy to use, warms up quickly, and is very quiet.
A clearly visible status light changes color to indicate "Ready", "Printing", and "Film Empty" conditions.

Environment-friendly design
The excellent low-noise design assures a pleasant environment. The actual running noise has been tuned to a low tone with a reduced high-temperature range, so that it gives the impression of being quieter than it actually is. While the overall noise has been suppressed, particular attention has been given to the standby noise, ensuring a quiet environment for clinics where standby operation accounts for most of the usage time.

Stable operation with no HDD
Hard drives store system software and data and, with that, there is always a risk that the disc will crash, bringing operation to a standstill. With the DRYPRO 832, we have eliminated the hard drive and introduced a design where the essential system software is run from compact flash memory and image data is managed by an external computer (CS-2/3 or Printlink5-IN), thereby contributing to stable operation.

Networking by Printlink
With its flexible networking capability, the Printlink print management system provides the ideal output solution in a variety of environments, enabling output from multiple Regius consoles (CS-2/3) and printing from DICOM modalities. By using Printlink IV/ID(sold separately), you can also connect to non-DICOM modalities.

Specifications of DRYPRO MODEL 832
Laser Source: Semiconductor laser
Film Size: 14"×17" (35×43cm), 14"×14" (35×35cm), 11"×14" (28×35cm),
10"×12" (25×30cm) and 8"×10" (20×25cm) selectable
Film: Dry Imaging recording film SD-Q/SD-QC
Image Format: 1,2,4,6,8,9,12,15,16,20,24,25,30,35,36,42,48,54,60,63,64
Image Memory: Print memory (64MB/standard)
Pixel Size: 78.6μm (320dpi)
Image data input: 8bit/12bit
Output gradation: 16384 levels (14bits)
Image Mode: Pixel replication/Function interpolation process
Processing capability: More than 90 sheets/hour
First Printing Time: less than 50sec
Input interface: Ethernet 10 base-T/100 base-TX/1000base-T
External connection: Connection to external computer (CS-2/3 or Printlink5-IN)
Supply: 1 Tray (standard) 2 Tray maximum (optional)
Border processing: Black/White
Trimmed frame: Available
Density correction: Automatic via built-in densitometer
Positive/negative: Available
Operating condition: 15-30 (59-86F) 30-70% RH
Power: UL:120V AC±10% 60Hz±Hz 10A
CE:220-240V AC±10% 50-60Hz± 1Hz 6A
Heat generation: UL:1200KJ/H or less
CE:1400KJ/H or less
Noise Level: In print Mode:53 dB or less
In standby mode:46 dB or less
Dimensions: W599×D585×H570mm *with 1 Tray
W599×D585×H722mm *with 2 Tray
Footprint: 0.35m²
Weight: approx. 95kg (209lb) *with 1 Tray; approx. 117kg (258lb) *with 2 Tray
Power Cable, Operation Manual, Cutter (for film loading)
Accessories: Power Cable, Operation Manual, Cutter (for film loading)