JBL SDP40HD THX Surround Processor/System Controller

JBL Updated: 2008-09-14 RSS
JBL SDP40HD THX Surround Processor/System Controller

SPECIFICATIONS

Audio Inputs: 8 Stereo pairs (RCA) or 5 stereo pairs plus
6-channel direct analog inputs;
6 coaxial digital audio S/P-DIF (RCA);
6 optical digital audio S/P-DIF (5 Toslink and 1 optical minijack)
Audio Output(s): Main: 12 Unbalanced (RCA) and 12 balanced (XLR) for front L/R, center, LFE, subwoofer L/R, side L/R, rear L/R and auxiliary L/R
Zone 2: 2 Stereo pairs (RCA, one fixed and one variable output level) and 2 balanced (XLR) for L/R variable output
Record: 2 Stereo pairs (RCA, one fixed and one variable output level), 2 parallel S/P-DIF digital audio (1 coaxial RCA and 1 optical Toslink)
Video Inputs/Outputs: Inputs: 2 composite (RCA), 3 S-Video and 4 component video (3 RCA, 1 BNC)
Outputs: 4 Composite (RCA, 2 monitor and 2 record), 4 S-Video
(2 monitor and 2 record) and 1 component (BNC)
Modes: Dolby® Digital; DTS®, DTS-ES® 6.1 Discrete and Matrix; DTS Neo:6®; Logic 7® Cinema and Music; THX® Surround EX™; Dolby Pro Logic® II; ; Dolby Pro Logic® IIx; 2-channel Stereo and more
OSD: On-screen display: 3 Position with disable and time-out, front-panel display: 3 intensities with disable
HDMI™: Inputs: 6 HDMI™ Type A (19-pin) connector
Output: 1 HDMI™ Type A (19-pin) connector
HDMI™ Performance: Video Resolutions: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p (resolutions dependent on the capability of the HDMI display connected to the SDP-40HD HDMI output connector)
Audio Sample Rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz
A/D Conversion: 24-bit, 96kHz, dual-bit ΔΣ architecture
D/A Conversion: 24-bit, 44.1 to 192kHz, multi-bit ΔΣ architecture
Frequency Response: 10Hz to 20kHz, +0.1dB/-0.25dB, -0.75dB at 40kHz, reference 1kHz
THD + Noise: Below 0.003% at 1kHz, maximum output level
Dynamic Range: 108dB minimum, 111dB typical, 22kHz bandwidth
Signal-to-Noise Ratio: 108dB minimum, 111dB typical, 22kHz bandwidth
Controls: RS232 (Bi-directional); infrared; hand-held remote control; trigger outputs: 1 power on/off trigger, 2 programmable triggers, +12 VDC, 0.5 amps each, on detachable screw terminals
Dimensions (H x W x D): 6.63" x 17.3" x 14.85" (169mm x 440mm x 377mm)
Rack-mounted: 7" x 19" x 14.85" (178mm x 483mm x 377mm)
Weight: 45 lb (20.5kg)
Power Consumption: 90 Watts Maximum
BTU Per Hour: 310 BTU
Power Requirements: 90-250 VAC, 50-60Hz, 120W (universal line input), detachable power cord
• THX Ultra2 Certification
• Four 32-bit DSP engines
• Broadcast-quality video switching
• Rear panel IR input connector
• Kit for mounting in a standard 19" equipment rack included