Sennheiser SKP 500 G2 Plug-on Transmitter

Sennheiser Updated: 2009-01-15 RSS
Sennheiser SKP 500 G2 Plug-on Transmitter

The SKP 500 G2 plug-on transmitter converts any wired microphone to wireless. It features switchable 48V phantom powering for condenser microphones. The plug-on transmitter can be combined with any of the receivers from the ew 500 G2 Series or the EM 550 G2. It features nine frequency banks with up to 20 directly accessible presets each – ready for immediate use.

Features

* 1440 tunable UHF frequencies for interference-free reception
* Absolutely reliable transmission and extended range due to high RF output power
* Pilot tone squelch for eliminating RF interference when transmitter is turned off
* Switchable 48 V phantom powering
* Backlit display (lights up when a button is pushed)
* Lock function avoids accidental changing of settings
* HDX compander for crystal-clear sound
* 4-step battery status display, also transmitted to receiver
* Mute function
* Wide range of accessories adapts the plug-on transmitter to any requirement

Delivery Includes

* 1 SKP 500 G2 plug-on transmitter
* 1 POP 1 protective pouch
* 2 batteries
* Operating instructions

Technical Data

RF frequency range: 518..... 866 MHz
Transmission/receiving frequencies: 1440 (max. 20 Presets)
Switching bandwidth: 36 MHz
Peak deviation: +/- 48 kHz
Compander: HDX
Frequency response (microphone): 40.....18000 Hz
Signal-to-noise ratio: > 115 dB(A)
THD, total harmonic distortion: < 0,9 %
In compliance with: ETS 300422 , ETS 300445 , CE , FCC
Audio-XLR connector: XLR-3 female
Power supply: 2x 1,5 V (AA)
RF output power: 30 mW
Operating time (transmitter): > 8 h (P48: 5h)
Input voltage range: mic 1,2 V max
Dimensions (Transmitter): 105 x 43 x 43 mm
Weight (Transmitter): 195 g