Mitsubishi VS-50XLF50U Front Access Projection Cube

Mitsubishi's VS-50XLF50U Projection Cube with front access is the perfect choice when your emergency operation center control room requires a space-saving video wall solution. Employing a unique front access mechanism that allows the video wall Projection Cubes to be placed against a wall, the need for service access space behind the video wall is eliminated. The screen opens and deploys in such a manner that all installation and service access is achieved through the front of the cube. The depth of the cube is just over 23 inches, requiring a minimum footprint, allowing you to maximize the use of the space in your emergency operation center or control room.

The 50" XGA high resolution VS-50XLF50U Projection Cube are also designed for 24 hour, 7 day a week operation, displaying your data clearly with Mitsubishi's durable DLP® light engine. Proprietary Mitsubishi features ensure that the video wall Projection Cubes in the display wall will maintain uniform brightness and color throughout the display.

Mitsubishi's Dynamic Brightness Balancing™ feature monitors the brightness in each VS-50XLF50U Projection Cube, adjusting them individually as required to ensure equal brightness on the display wall. Smart Lamp™ and Smart Colorwheel™ maintain color uniformity on the display wall. Each lamp and color wheel stores its own color characteristics internally, and when either is replaced the function is activated and recalibrates the cube into perfect color balance with the rest of the video wall Projection Cubes in the display wall.

Installation and service time can be greatly reduced through the optional motorized adjustment tool. It allows remotely operated mechanical adjustments to the image geometry. This time-saving device enables a single technician to make the slightest adjustments to the 6-axis adjuster, creating precise image alignment between the display wall cubes.

Display
Display Technology: DLP® chip (0.7", 12° single chip)
Brightness: Bright: 1000 cd/m² (typical); 292 ft.-L (typical); Normal: 800 cd/m² (typical); 234 ft.-L (typical)
Light Output: Bright: 700 ANSI Lumens; Normal: 560 ANSI Lumens
Native Resolution: 1024 x 768 pixels (XGA)
Screen Size: 50" diagonal viewable (1270 mm)
Contrast Ratio: 1600:1 (typical)
Pixel Clock Rate: 25 - 122 MHz
Viewing Angle: Horizontal: 160°; Vertical: 60°(typical)
Mullion Size: 0.2 mm - 1.0 mm (*)

Interface
RGB Input Scanning Frequency: VGA (640x480) - SXGA+ (1400x1050)
Horizontal: 31.5 - 78.0 kHz; Vertical: 49 - 85 Hz
Analog RGB Input Signal: 5 BNC (RGBHV) x1
Video: 0.7Vp-p positive/75 ohms;
Synchronous: TTL level (positive/negative)
High Level: 2.5-5.0V; Low Level: 0-0.5V;
Sync On Green: Video: 0.7Vp-p positive;
Synchronous: 0.3Vp-p negative
Digital RGB Input Signal: TMDS (DVI-D) x1
Control Signal Input: RS-232C: D-Sub 9 pins; D-Sub 9 pins x 2 (input, output) Mitsubishi original control link; Wired Remote: F3.5 Jack; IR Receiver

Lamp
Lamp Type: High pressure mercury lamp 100W/120W
Lamp Life: 10,000 hours/6,000 hours

Physical
Weight: 152 lbs. (69 kg)
Dimensions (WxHxD): 40.0 x 38.7 x 23.4" (1016 x 982.5 x 595 mm)
Power Consumption: 195/195W
Voltage Range: AC 100-240V ±10%, 50/60Hz ±1 Hz
Thermal Dissipation: 167.7 kcal/h (665.5 BTU/h)