Mitsubishi VS-67PH50U Rear Access Lamp Changer Projection Cube

Mitsubishi's VS-67PH50U Projection Cube is the perfect choice when your control room requires a space-saving video wall solution with a high pixel density. This ultra high resolution 67" SXGA+ video wall cube is designed for 24 hour, 7 day a week operation, displaying your data clearly with Mitsubishi's durable DLP® engine.

Proprietary Mitsubishi features ensure that the VS-67PH50U Projection Cube will maintain uniform brightness and color throughout the data center display wall. Mitsubishi's Dynamic Brightness Balancing™ feature monitors the brightness in each and every VS-67PH50U Projection Cube, adjusting them individually as required to ensure equal brightness on the display. Smart Lamp™ and Smart Colorwheel™ maintain color uniformity on the data center display wall. Each lamp and color wheel stores its own color characteristics internally, and when either is replaced the function activates, recalibrating the cube into perfect color balance with the data center display wall.

The VS-67PH50U Projection Cube is a rear accessible model that requires a minimum amount of space behind the video monitor for service access. To help identify issues quickly the VS-67PH50U Projection Cube employs a simple, on-screen diagnostic tool that helps to identify the service issue. Most repairs can be completed wih minimal down time.

Installation and service time can be greatly reduced through the optional motorized adjustment tool. It allows remotely operated mechanical adjustments to the image geometry. This time-saving device enables a single technician to make the slightest adjustments to the 6-axis adjuster, creating precise image alignment between the data center display wall cubes.

Display
Display Technology: DLP® chip (0.95", 12° single chip)
Brightness: Bright: 500 cd/m² (typical); 146 ft.-L (typical);
Normal: 400 cd/m² (typical); 117 ft.-L (typical)
Light Output: Bright: 700 ANSI Lumens; Normal: 560 ANSI Lumens
Native Resolution: 1400 x 1050 pixels (SXGA+)
Screen Size: 67" diagonal viewable (1701 mm)
Contrast Ratio: 1800:1 (typical)
Pixel Clock Rate: 25 - 122 MHz
Viewing Angle: Horizontal: 160°; Vertical: 60°(typical)
Mullion Size: 0.2 mm - 2.0 mm (*)

Interface
RGB Input Scanning Frequency: VGA (640x480) - SXGA+ (1400x1050)
Horizontal: 31.5 - 78.0 kHz; Vertical: 49 - 85 Hz
Analog RGB Input Signal: 5 BNC (RGBHV) x1
Video: 0.7Vp-p positive/75 ohms;
Synchronous: TTL level (positive/negative),
High Level: 2.5-5.0V; Low Level: 0-0.5V;
Sync On Green: Video: 0.7Vp-p positive;
Synchronous: 0.3Vp-p negative
Digital RGB Input Signal: TMDS (DVI-D) x1
Control Signal Input: RS-232C: D-Sub 9 pins; D-Sub 9 pins x 2
(input, output) Mitsubishi original control link;
Wired Remote: F3.5 Jack; IR Receiver

Lamp
Lamp Type: High pressure mercury lamp 100W/120W
Lamp Life: 10,000 hours/6,000 hours

Physical
Weight: 201 lbs. (91 kg)
Dimensions (WxHxD): 53.6 x 50.5 x 30.6" (1361 x 1282 x 778 mm)
Power Consumption: 195/195W
Voltage Range: AC 100-240V ±10%, 50/60Hz ±1 Hz
Thermal Dissipation: 167.7 kcal/h (665.5 BTU/h)

Other
Temperature and Humidity: Condition at Operation: 50-95°F; (10-35°C) 20-80% non-condensing
Condition at Storage: -4-122°F; (-20-50°C) 20-80% non-condensing
Safety Approval: UL60950, CSA22.2 No. 60950, EN60950, CNS14336
EMC: FCC Part 15 Class A, Idustry Canada Class A, EN55022, Class A, EN55024, EN61000-3-2, EN61000-3-3, GB9254, GB17625.1, KN22 (CISPR Pub.22) Class A, KN24 (CISPR Pub.24), CNS13438 Class A