Mitsubishi VS-67PHF50U Front Access Lamp Changer Projection Cube

The VS-67PHF50U Projection Cube from Mitsubishi with front access and integrated lamp changer is the perfect choice when your data center requires high pixel density in a space-saving video wall solution. The unique front access mechanism allows the display cubes to be placed against a wall, eliminating the need for service access space behind the display. The automatic lamp changer provides additional reliability for your display wall, as the cube will sense a lamp failure or pre-determined degeneration of brightness and automatically switch to a spare lamp already installed in the light engine. An image is displayed just 7 seconds after initiating the lamp switch.

This ultra high resolution 67" SXGA+ video wall cube is designed for 24 hour, 7 day a week operation, displaying your data clearly with Mitsubishi's durable DLP® engine. Proprietary Mitsubishi features ensure that the VS-67PHF50U Projection Cube will maintain uniform brightness and color throughout the data center display wall. Mitsubishi's Dynamic Brightness Balancing™ feature monitors the brightness in each and every VS-67PHF50U Projection Cube, adjusting them individually as required to ensure equal brightness on the display. Smart Lamp™ and Smart Color wheel™ maintain color uniformity on the data center display wall. Each lamp and color wheel stores its own color characteristics internally, and when either is replaced the function activates, recalibrating the cube into perfect color balance with the data center display wall.

To help identify issues quickly the VS-67PHF50U Projection Cube employs a simple, on-screen diagnostic tool that helps to identify the service issue. Most repairs can be completed with minimal down time.

Installation and service time can be greatly reduced through the optional motorized adjustment tool. It allows remotely operated mechanical adjustments to the image geometry. This time-saving device enables a single technician to make the slightest adjustments to the 6-axis adjuster, creating precise image alignment between the data center display wall cubes.

Display
Display Technology: DLP® chip (0.95", 12° single chip)
Brightness: Bright: 500 cd/m² (typical); 146 ft.-L (typical); Normal: 400 cd/m² (typical); 117 ft.-L (typical)
Light Output: Bright: 700 ANSI Lumens; Normal: 560 ANSI Lumens
Native Resolution: 1400 x 1050 pixels (SXGA+)
Screen Size: 67" diagonal viewable (1701 mm)
Contrast Ratio: 1800:1 (typical)
Pixel Clock Rate: 25 - 122 MHz
Viewing Angle: Horizontal: 160°; Vertical: 60°(typical)
Mullion Size: 1.0 mm - 3.0 mm (*)

Interface
RGB Input Scanning Frequency: VGA (640x480) - SXGA+ (1400x1050)
Horizontal: 31.5 - 78.0 kHz; Vertical: 49 - 85 Hz
Analog RGB Input Signal: 5 BNC (RGBHV) x1
Video: 0.7Vp-p positive/75 ohms;
Synchronous: TTL level (positive/negative),
High Level: 2.5-5.0V; Low Level: 0-0.5V;
Sync On Green: Video: 0.7Vp-p positive;
Synchronous: 0.3Vp-p negative
Digital RGB Input Signal: TMDS (DVI-D) x1
Control Signal Input: RS-232C: D-Sub 9 pins; D-Sub 9 pins x 2 (input, output) Mitsubishi original control link; Wired Remote: F3.5 Jack; IR Receiver

Lamp
Lamp Type: High pressure mercury lamp 100W/120W
Lamp Life: 10,000 hours/6,000 hours

Physical
Weight: 213 lbs. (97 kg)
Dimensions (WxHxD): 53.6 x 50.5 x 30.6" (1361 x 1282 x 778 mm)
Power Consumption: 195/195W
Voltage Range: AC 100-240V ±10%, 50/60Hz ±1 Hz
Thermal Dissipation: 167.7 kcal/h (665.5 BTU/h)