Mitsubishi VS-67XLWF50U Front Access Lamp Changer Projection Cube
Mitsubishi Updated: 2009-04-14 RSSThe VS-67XLWF50U Projection Cube from Mitsubishi with front access and integrated lamp changer is the ideal choice when your mission critical application requires a space-saving data display wall or video monitoring system. The unique front access mechanism allows the display cubes to be placed against a wall, eliminating the need for service access space behind the display. The automatic lamp changer provides additional reliability for your display wall. The cube will sense a lamp failure or pre-determined degeneration of brightness and automatically switch to a spare lamp already installed in the light engine, displaying an image just 7 seconds after initiating the lamp switch.
The 67" XGA VS-67XLWF50U Projection Cube is also designed for 24 hour, 7 day a week operation, displaying your data clearly with Mitsubishi's durable DLP® light engine. Proprietary Mitsubishi features ensure that the cubes in the display wall will maintain uniform brightness and color throughout the video monitoring system.
Mitsubishi's Dynamic Brightness Balancing™ feature monitors the brightness in each and every cube, adjusting them individually as required to ensure equal brightness on the display. The Smart Lamp™ and Smart Colorwheel™ features maintain color uniformity on every VS-67XLWF50U Projection Cube in the video monitoring system. Each lamp and color wheel stores its own color characteristics internally, and when either is replaced the function is activated and recalibrates the cube into perfect color balance with the entire display wall.
Installation and service time can be greatly reduced through the optional motorized adjustment tool. It allows remotely operated mechanical adjustments to the image geometry. This time-saving device enables a single technician to make the slightest adjustments to the 6-axis adjuster, creating precise image alignment between the display wall cubes.
Display
Display Technology: DLP® chip (0.7", 12° single chip)
Brightness: Bright: 500 cd/m² (typical); 146 ft.-L (typical); Normal: 400 cd/m² (typical); 117 ft.-L (typical)
Light Output: Bright: 700 ANSI Lumens; Normal: 560 ANSI Lumens
Native Resolution: 1024 x 768 pixels (XGA)
Screen Size: 67" diagonal viewable (1701 mm)
Contrast Ratio: 1600:1 (typical)
Pixel Clock Rate: 25 - 122 MHz
Viewing Angle: Horizontal: 160°; Vertical: 60°(typical)
Mullion Size: 1.0 mm - 3.0 mm (*)
Interface
RGB Input Scanning Frequency: VGA (640x480) - SXGA+ (1400x1050)
Horizontal: 31.5 - 78.0 kHz; Vertical: 49 - 85 Hz
Analog RGB Input Signal: 5 BNC (RGBHV) x1
Video: 0.7Vp-p positive/75 ohms;
Synchronous: TTL level (positive/negative),
High Level: 2.5-5.0V; Low Level: 0-0.5V;
Sync On Green: Video: 0.7Vp-p positive;
Synchronous: 0.3Vp-p negative
Digital RGB Input Signal: TMDS (DVI-D) x1
Control Signal Input: RS-232C: D-Sub 9 pins; D-Sub 9 pins x 2
(input, output) Mitsubishi original control link;
Wired Remote: F3.5 Jack; IR Receiver
Lamp
Lamp Type: High pressure mercury lamp 100W/120W
Lamp Life: 10,000 hours/6,000 hours
Physical
Weight: 209 lbs. (95 kg)
Dimensions (WxHxD): 53.6 x 50.5 x 30.6" (1361 x 1282 x 778 mm)
Power Consumption: 195/195W
Voltage Range: AC 100-240V ±10%, 50/60Hz ±1 Hz
Thermal Dissipation: 167.7 kcal/h (665.5 BTU/h)
Drawings
Data Sheet
Related Manuals
Mitsubishi VS-67XLF50U Front Access Projection Cube
Mitsubishi VS-67PH50U Rear Access Lamp Changer Projection Cube
Mitsubishi VS-50XLW50U Rear Access Lamp Changer Projection Cube
Mitsubishi VS-50XL50U Rear Access Projection Cube
Mitsubishi VS-50PH50U Rear Access Lamp Changer Projection Cube
Mitsubishi VS-67XL50U Rear Access Projection Cube
Mitsubishi VS-67XLW50U Rear Access Lamp Changer Projection Cube
Mitsubishi VS-80PH40U Rear Access Projection Cube
Mitsubishi Resolia Indoor LED Billboard Display
Mitsubishi LDT421V2 LCD Monitor
Mitsubishi LDT521V LCD Monitor
Mitsubishi LDT651L LCD Monitor