Panasonic BT-LH2600W Production Monitor

Panasonic Updated: 2007-07-01
Panasonic BT-LH2600W Production Monitor

•  Unsurpassed built quality with die cast aluminum frame
•  3 year "production tough" warranty
•  True 16x9 format aspect ratio with 1366 x 768 resolution
•  Audio level meters superimposed and see through - up to eight channels from HD-SDI
•  Embedded audio capability now built-in as standard equipment
•  80% of 4x3 safety marker can now be seen in 16x9 mode
•  "Pixel to Pixel" mode for 720 or 1080 HD signals for critical focusing
•  26" diagonal yields four 13" pictures when used with a quad splitter
•  Exclusive! - High-speed response -- no blurring during pans thanks to our overdrive circuit
•  Exclusive! - Industry's lowest delay image processing circuit -- new I/P conversion algorithm converts interlaced signals to progressive signals with minimal delay
•  Exclusive! - Waveform monitor -- a superimposed function that graphically displays luminance levels from -5 IRE to 108 IRE in any of the monitor's four corners
•  Exclusive! - Freeze frame - frame grab for image comparison / analysis (entire frame or center)
•  Exclusive! - Split screen function for critical color matching (live input vs. freeze frame)
•  Two SD/HD-SDI auto sensing inputs with one active thru-out
•  Frame marker lines (4:3, 16:9, 2.35:1) with side panel shading at 0%, 50%, or 100%
•  Five function buttons (user-defined) can be set to WFM, Blue Only, H/V Delay, "Pixel to Pixel", Monochrome, Aspect ratio, Gamma select, Auto-setup, Scan, and 2/4/8 audio level meters
•  Faithful color reproduction -- closely matches chromaticity of CRT monitors
•  Diagonal Line Compensation smoothes out "jaggies" for improved SD response -- new algorithm reduces picture degradation to near zero in vertical direction, detects correlation of diagonal direction, and minimizes aliasing that causes degradation in the moving picture
•  176 degree horizontal and vertical viewing angle
•  CineGammaTM compensation - expressly for VariCam FILM-REC monitoring
•  One-piece design - no umbilical cord or separate AC power supply
•  Component input on BNC connectors - Y, Pb, Pr, PC RGB inputs and composite & Y/C
•  Amplified stereo speakers (two RCA pin jacks input or embedded audio on SD/HD-SDI included)
•  Color temperature selection (D9300K / D6500K / D5600K / user adjustable)
•  2.35:1 anamorphic mode for viewing 16:9 cameras with anamorphic lens adapter
•  GPI and RS-232C ports for external control
•  Menu can be positioned in five different screen locations
•  Menu control of built-in fan
•  Preset/manual video control adjustments with indicator lights for non unity settings
•  Three level tally lamp (red, green or amber)
•  Desk stand included