Tyan Tahoe 2 ATX S1682D/L Motherboard

TYAN Updated: 2009-01-28 RSS
Tyan Tahoe 2 ATX S1682D/L Motherboard

Tyan Tahoe 2 ATX is a quality, high performance single/dual processor system platform based on the powerful Intel Pentium Pro microprocessors. This mainboard is designed around the latest and fastest Intel 440FX chipset and can support CPU speeds of 233 MHz through 300 MHz.

The Tahoe 2 ATX supports EDO memory, ECC and memory parity checking.The board's PCI Local Bus provides high performance capabilities that are ideal for a wide range of demanding applications such as: CAD, CAM, CAE, networking, multi-user environments, database management, desktop publishing, image processing and 3D animation.

This integrated system board achieves the highest reliability and is based on an ATX form factor. Some of the features included are: on-board dual channel PCI IDE, on-board floppy controller, on-board high speed I/O, Universal Serial Bus and on-board PS/2 mouse connector.

Flexibility and expandibility have been designed into the Tahoe 2 ATX. With I/O and drive controller support built on-board, the five PCI and three ISA (One ISA and one PCI as a shared slot) slots are free for add-on expansion cards. With eight SIMM sockets, the Tahoe 2 ATX can provide a very flexible memory configuration of 8MB to 1024MB of RAM. With the board's support for dual Pentium Pro and Pentium II processors, you can start a system with just one CPU, and later add another, when more processing power is required.

* Processor
- Dual/Single Pentium II 233-300 MHz
- Dual/Single Pentium Pro 150-200 MHz
- VRM Component installed on board
- Two Slot 1 Connectors (SEC)
- (Dual CPUs must be of same type and Speed)
- Dual On-board CPU Fan Headers

* System Memory
- (8) 72-pin SIMM Sockets for up to 1024MB
- EDO or FPM DRAM Support
- ECC and Parity Support
- 4 memory banks total

* Expansion Slots
- Five 32-bit PCI Bus Mastering Slots
- Three 16-bit ISA Slots
- One Shared PCI/ISA Slot - 7 usable

* Chipset
- Intel 440FX (NATOMA)

* Disk Drive & System I/O
- Two PCI Bus-Master enhanced IDE Ports
- 4 HDD + EIDE CD-ROM Support
- Bus-Mastering Mode 2 (Up to 22MB/Sec DTR)
- PIO Mode 3 & 4 (Up to 17MB/SEC DTR)
- Two Floppy Drive Support (Up to 2.88MB)
- Two 16550 High Speed Serial Ports
- One ECP/EPP High Speed Parallel Port
- 2 USB Ports Rev 1.2; one IR Port
- PS/2 Mouse port using IRQ 12

- Award or AMI BIOS; Green PC Compatible
- Microsoft Plug and Play Ready

* Form Factor
- ATX (9.75" x 12.00");