Tyan Tempest i5100T S5377 Motherboard

TYAN Updated: 2009-01-30 RSS
Tyan Tempest i5100T S5377 Motherboard

A very high density platform built with Intel 5100 series chipset with Intel 5100/5300/5400 series processors supported in an 13"x5.9" form factor. A total of (8) registered ECC/non-ECC DDR2 DIMM slots, (2) GbE LAN ports, embedded SATA2 Host controllers, and (1) PCI Express x16 expansion slot, the Tempest i5100T S5377, provides a lower energy consumption, higher power efficiency, and more system memory for running web hosting and data center applications. With the narrow and long design, it enables two Tempest i5100T S5377 boards to integrate into a 1U chassis for better server performance and scalability.

Processor
- One LGA771 socket
- Supports Intel® 5100/5200/5400 processors
- Supports 1.33/ 1.06GHz FSB

Chipset
- Intel® 5100 Chipset (San Clemente) North Bridge
- Intel® ICH9-R South Bridge
- Winbond W83627DHG Super I/O

Memory
Total 8 DIMM sockets to support:
- DDR2-533/667 Registered ECC DIMMs,
- Single & Dual Rank, Maximum 4 Ranks/Channel
- Single/Dual channel support
- Support 256Mb, 512Mb, 1Gb, 2Gb, & 4Gb memory modules, Max 32GB

Expansion Slots
- One PCI-E x16

Integrated I/O Interfaces
- One 200-pin SO-DIMM socket for server management (M3295-2/M3296)
- Two USB pin-header to support USB DOM and two USB 2.0 devices
- Tyan FPIO to support NMI SM-Bus, Chassis Intrusion

Back Panel I/O Ports
- One stacked dual USB ports with One RJ45 port (supports M3295-2/M3296 IPMI from LAN)
- One stacked up LAN ports with dual RJ45 connectors with Transformer & LEDs
- One 9-pin COM port
- One 15-pin VGA port
- One ID LED

LAN controllers
- One Intel 82571EB dual port Gigabit controllers to support two GbE ports

System Management
- Total 4 fan headers (8-pin)with control and tachometer monitoring
- Monitors voltage for CPU, Memory & Power Supply
- Monitoring temperature for CPU & environment
- Supports Serial Console Redirect
- Supports Watch Dog Timer
- IPMI 2.0 supported

Graphics
- XGI Z9S, PCI graphics controller
- 32MB DDR2 frame buffer of video memory

Integrated Serial ATA II (ICH9-R)
- Supports four Serial ATA ports running up to 3.0Gb/s,
- Software RAID Levels 0, 1, 5, 10 supported (Window OS only)

BIOS
- AMI BIOS® on 8Mbit Flash ROM
- Supports ACPI 2.0
- Supports boot from USB device
- WOL and PXE support
- Power-on mode control for AC power loss recovery
- PnP, DMI2.0, WfM2.0 Power management (S1,S4,S5 support)

Form Factor
- Proprietary 5.9"x13"

Power
- Onboard VRD 11.0
- Proprietary 18-pin power connectors