Tyan Thunder K8QSD Pro S4882-D Motherboard

TYAN Updated: 2009-01-29 RSS

The power of a 4-way multiplied: introducing the Thunder K8QSD Pro (S4882-D), a 4-way platform designed to support DUAL CORE AMD Opteron™ processors for performance applications. Numerous features have been built into the Thunder K8QSD Pro (S4882-D) including support for dual AMD Opteron™ 800 series processors with 32/64-bit scalability, support for up to 32GB of Registered DDR400/333 memory with ECC and ChipKill, onboard video and integrated dual Gigabit Ethernet LAN ports, remote management support, and an Ultra320 SCSI option. With this many features, coupled with the power of AMD Dual Core support, customers can come to expect a new level of performance never before seen in a 4-way server platform!

Processor
- Quad µPGA 940-pin ZIF sockets
- Supports up to four AMD Opteron™ 800 series
- Supports Single and Dual Core processors
- Four onboard 3-phase VRMs
- Integrated 128-bit DDR memory controller

Chipset
- AMD-8131™ HyperTransport™ PCI-X Tunnel
- AMD-8111™ HyperTransport™ I/O Hub
- Winbond™ W83627HF Super I/O ASIC
- Total five Hardware Monitoring IC:
- Two ADT7463 and three LM63

Memory
- 128-bit dual channel (interleaved) memory bus
- Total of sixteen DDR DIMM sockets (4 per CPU)
- Supports up to 64GB of Registered DDR
- Supports Single/Dual/Quad Rank mem. modules
- Supports DDR 266/333/400 memory
- Supports ECC with CHIPKILL technology

Expansion Slots
- Two independent PCI-X buses
- Two 64-bit 66/33 MHz (3.3-Volt) PCI-X slots from PCI-X bridge A
- Two 64-bit 133/100/66/33 MHz (3.3-Volt) PCI-X slots from PCI-X bridge B (only one slot for running at 133MHz)
- One Legacy 32-bit 33MHz (5-Volt) PCI slot
- Total of five usable slots

Integrated I/O
- One floppy connector supports one drive
- Two 9-pin serial ports (1 connector & 1 header) and one 25-pin parallel port pin-header
- PS/2 mouse and keyboard connectors
- Four USB v1.1 front panel headers (AMD-8111)
- Two USB v2.0 rear connectors (VT6212)

System Management
- 3-pin fan headers (9) w/ tachometer monitoring
- 3-pin fan headers (4) w/ (PWM) speed control

Integrated Enhanced IDE Controller
- Provides two IDE dual-drive ports for up to four EIDE devices
- Supports for UDMA 33/66/100/133 IDE drives
- and ATAPI compliant devices

Integrated PCI Graphics
- ATI® RAGE™ XL PCI graphics controller
- 8MB Frame Buffer of video memory

Integrated LAN Controllers
- Broadcom BCM5704C dual-channel GbE LAN: Two RJ-45 LAN connectors with LEDs; Connected to PCI-X Bridge A; Support Jumbo Frame
- Two Front Panel LED headers

Integrated Serial ATA Controller
- One Silicon Image SI3114 controller
- Four Serial ATA 1.0 ports
- Supports up to four SATA drives
- Supports RAID 0, 1, 0+1

Integrated Dual Channel SCSI (option)
- LSI® 53C1030 U320 SCSI controlelr
- Dual-channel Ultra320 SCSI
- Connects to PCI-X Bridge A
- Supports LSI® ZCR (Zero Channel RAID)

Intelligent Platform Management Interface Header
- TYAN Server Management Daughter card (optional) supports features listed below via IPMI header (SMDC/TSO Support)
- Baseboard Management Controller (BMC)
- Tailored for IPMI
- Supports KCS and BT styles
- Flexible Windows & Linux Management Solution
- Supports RMCP and SNMP protocols
- Supports ASF standard and EMP
- I2C serial multi-master controllers and UARTs
- Build-in IPMB connector
- Remote power on/off and reset support (IPMI-over-LAN)

BIOS
- Phoenix BIOS; 4Mbit LPC Flash ROM
- Watchdog timer
- USB boot support
- 48-bit LBA Support
- Supports PXE via Ethernet
- ACPI 2.0 & 1.0B support

Form Factor
- SSI MEB footprint (13"x16"; 330.2x406.4mm)
- EPS12V power connectors
- Serial (one) and VGA (one) connectors
- Stacked USB 2.0 (two) connectors
- Two RJ-45 side-by-side LAN connectors with LEDs