Tyan Tiger MPX S2466 Motherboard

TYAN Updated: 2009-01-29 RSS
Tyan Tiger MPX S2466 Motherboard

The Tiger MPX provides breakthrough performance for power-user PCs, ultra-fast workstations and entry-level servers, including supercomputer cluster servers. Designed around the AMD-760 MPX chipset, it supports two AMD Athlon™ MP Processors and features a 66MHz 64-bit PCI bus for outstanding I/O performance. The Tiger MPX also supports high-speed DDR memory, multiple 64-bit and 32-bit PCI perpherals, a 266MHz bus, 4x AGP graphics card, and 10/100 Fast Ethernet. For cost-effective, cutting-edge SMP performance, choose TYAN's Tiger MPX.

Processor
- Dual PGA462 ZIF sockets
- Supports up to two AMD Athlon™ MP processors
- Two onboard VRMs
- Front-Side Bus support for 266/200MHz

Chipset
- AMD-760 MPX chipset
- AMD-762 north bridge & AMD-768 south bridge
- Winbond™ W83627HF Super I/O ASIC

Memory
- Four 184-pin 2.5-Volt DDR DIMM sockets
- Supports up to 4GB* of Registered DDR 200/266
- Supports ECC (72-bit) memory modules
* Note: The AMD-760 MPX requires a portion of memory to be reserved for PCI devices. Allocation for these devices is dependent on the number of PCI devices installed, and option ROM for each device. Common configurations will see 3.5GB to 3.8GB of available memory.

Expansion Slots
- One AGP slot supports 4x/2x AGP
- Two 64-bit 66MHz (3.3-volt) PCI slots
- Four 32-bit 33MHz (5-volt) PCI slots
- Total of seven usable slots

Integrated I/O
- One floppy connector supports up to two drives
- Two 9-pin 16550-based serial ports
- One 25-pin SPP/ECP/EPP parallel header
- Four USB ports (two via back plate, and two more via optional cable)
- PS/2 keyboard and mouse ports

System Management
- 3-pin fan monitoring headers
- Winbond™ W83782D hardware monitoring ASIC
- System Monitoring Software: here

Integrated PCI IDE
- Dual-channel master mode
- Supports up to four enhanced IDE devices
- Support for ATA-100/66/33 IDE and ATAPI compliant devices

Integrated LAN Controllers
- 3Com 3C920 ASIC with 3C905 driver set LAN
- Supports 10Mbps and 100Mbps transfer rates

BIOS
- Phoenix BIOS 2/4Mbit Flash ROM
- User settings for hardware monitoring
- Auto-configuration of IDE hard drive types
- Multiple boot options
- DMI 2.0 compliant

Form Factor
- ATX footprint (12" x 10.3", 304.8 x 261.62mm)
- ATX & ATX 12V power connector configuration
- Stacked parallel (one) and serial (two) ports
- Stacked LAN (one) port
- Stacked keyboard and mouse ports

Regulatory
- FCC DoC (Declaration of Conformity) certified
- European CE (Declaration of Conformity)

Note
- The Tiger MPX is designed to accept the widest variety of ATX power supplies ATX2.01 / 2.03 and ATX12V, The supply must have a minimum output of 300 watts.