Tyan Tomcat i815T S2080 Motherboard

TYAN Updated: 2009-01-29 RSS
Tyan Tomcat i815T S2080 Motherboard

TYAN's Tomcat i815T is the ideal platform for home and business users requiring the latest features at an affordable price. This system board also supports a wide range of Intel Celeron and Pentium III processors, including the new "Tualatin" series processors. In addition, the Tomcat i815T features an extremely flexible AGP design with integrated AGP graphics on the system board, as well as a 4x AGP slot for users requiring maximum graphics performance. These features, along with support for ATA-100 drives high-speed SDRAM, and a 100/133MHz system bus make the Tomcat i815T the perfect choice for today's mainstream applications.

Processor
- Single PGA370 ZIF socket
- Supports one Pentium III (FC-PGA) or Celeron processor, including "Tualatin"
- One onboard VRM (VRM 8.5 spec)
- System bus support for 100MHz and 133MHz

Chipset
- Intel 815e(p) chipset
- MCH, ICH2 and FWH (4Mb)
- NSC PC87366 LPC Super I/O ASIC

Memory
- Three 3.3v 168-pin DIMM sockets
- Up to 512MB of PC100/133 SDRAM
- Supports unbuf., non-ECC SDRAM modules

Expansion Slots (Total of seven usable slots)
- One AGP slot supports 4x AGP
- Six 32-bit 33MHz (5-volt) PCI slots

Integrated PCI IDE
- Dual-channel master mode
- Up to four Enhanced IDE devices
- Support DMA 100/66/33 IDE and ATAPI compliant devices

Integrated Video (option)
- Intel i815e D.V.M. technology graphics core
- Utilizes system memory as a frame buffer
- Standard 15-pin analog VGA port

Integrated LAN Controllers (option)
- Dual LAN controllers: one via Intel ICH2, one via Intel 82559
- 10/100Mbps data transfer rate per controller

Integrated I/O Interfaces
- One floppy connector supports up to two drives
- Two 9-pin 16550-based serial ports (one port via optional cable)
- One 25-pin SPP/ECP/EPP parallel port
- Four USB ports (Two ports via optional cable)
- PS/2 keyboard and mouse ports

BIOS
- AMI BIOS on 4Mb Flash ROM
- Supports APM v1.2 & ACPI v1.0
- User settings for hardware monitoring
- Auto-configuration of IDE hard drive types
- Muliple boot options; DMI 2.0 compliant

Form Factor
- ATX footprint (12" x 8", 304.8mm x 203.2mm)
- One 20-pin ATX power connector
- Stacked keyboard and mouse ports
- Stacked parallel, serial, & optional VGA ports; stacked (2) USB ports
- Side-by-side LAN (two) ports (optional)