Tyan Trinity 371 S1857 Motherboard

TYAN Updated: 2009-01-28 RSS
Tyan Trinity 371 S1857 Motherboard

Designed for high performance Desktop PC systems, Tyan Trinity 371 boasts a high level of system board flexibility by offering both Slot 1 and PPGA-370 processor support. With on-board PCI audio option and six PCI slots, the Trinity 371 is an ideal platform for any system requiring high expandability and upgradeability.

***Note: This board conforms to the new PCI 2.2 spec. This requires 3.3v standby for all PCI slots, DIMM banks, and PS/2 outputs (KB/PS/2 Mouse). Always remember to unplug the AC power cord before adding any PCI cards, memory, or plugging or unplugging keyboard or mouse. Otherwise the motherboard may automatically power up when adding the component.

* Processor
- Single Slot 1 and Socket 370
- Supports processor built-in 128/512K+ Cache
- FSB support for 66 / 100 MHz
- Integrated VRM complies to spec 8.4
- Supports Clock multiplier 3.0 to 8.0
- Auto detect CPU Core Voltage

* Chipset
- Intel 440BX (100 MHz AGP set)
- Winbond W83977F Super I/O controller

* System Memory
- Supports 32 to 768MB
- Three 3.3V unbuffered 168-pin DIMM Sockets
- PC100 compliant SDRAM support
- Supports ECC (72-bit) type memory module

* Expansion Slots
- Total 7 usable slots
- Five 32-bit PCI 2.1 Bus Mastering Slots
- One PCI / ISA Slot; One 2x AGP 2.0 Slot
- All slots support full length add-on cards

* Integrated PCI IDE
- Two 40-pin IDE connectors for up to 4 drives.
- PIO Mode 3/4, UltraDMA 33 supported
- ATAPI IDE CD-ROM and LS-120 supported

* Other Features
- 3-pin Wake on LAN header
- 3-pin Wake on Ring header
- Two 3-pin Fan speed monitoring headers
- 2-pin Chassis Intrusion header

* Integrated Audio (optional)
- Creative Labs ES1373 PCI chip
- AC97 codec rev 2.1; One MIDI / Game port
- Line in, MIC-in and Line-out ports
- 4-pin CD-ROM audio (ATAPI) header
- 4-pin Telephony (ATAPI) header

* Disk Drive & System I/O
- One Floppy connector for up to 2 drives (1.44MB, 2.88MB, 3-mode)
- Two 9-pin 16550 UART Serial ports
- One 25-pin ECP/EPP Parallel port
- One IrDA TX / RX header
- Two USB rev. 1.2 ports
- PS/2 Mouse and Keyboard Ports

* BIOS
- AMI BIOS on 2MB flash EEPROM
- Plug and Play
- APM 1.2 / ACPI 1.0 / PC99 compliant
- IDE drive auto configure; soft power-down
- Multiple boot options; DMI 2.0 compliant
- Hardware monitoring of CPU voltage, temperature and Fan status (optional)

* Form Factor
- ATX Design (8.3" x 12.0"); 4-layer board
- 20-pin ATX Power Connectors
- Stacked ATX I/O Connectors
- Type "C" I/O Shield (Intel Caymen Compatible)

* Regulatory
- FCC DoC (Declaration of Conformity)
- European CE (Declaration of Conformity)