Tyan Trinity K7 S2380 Motherboard

TYAN Updated: 2009-01-28 RSS
Tyan Trinity K7 S2380 Motherboard

Tyan Trinity K7 is designed for high performance desktop applications.  With six PCI slots in addition to one shared ISA slot, the Trinity K7 offers maximum expandability and flexibility in an ATX form factor.  Utilizing the new VIA KX-133 chipset, this board offers a 200 MHz FSB, Slot A support  (AMD Classic Athlon), 4x AGP, UltraDMA33/66, and PC133 memory support. This feature-rich systemboard is ideal for graphics and memory-intensive applications.

* Processor
- Single Slot A; 200MHz FSB
- AMD Classic Athlon 500MHz to 1 GHz
- Auto-detect Processor Voltage
- Clock multiplier 5.0 to 10.0
- ECC Protection on system and Cache Interfaces

* Chipset
- VIA Apollo KX-133; VT8371 and VT82C686A

* System Memory
- Three 168-pin 3.3V DIMM Sockets
- Supports up to 768 MB
- Supports PC100 / PC133 SDRAM and VCM SDRAM
- ECC memory not supported

* Cache Memory
- Processor Built-in 128KB L1 Cache
- Processor Built-in 512KB L2 Cache

* Hardware Monitoring
- VIA hardware monitoring chip
- 3-pin Fan monitoring headers
- Flexible Temperature Sensor Under CPU heatsink
- Hardware Detects +/- 5V, +/- 12V, CPU status
- System Health Status Detect
- 3-pin Wake on LAN header
- 3-pin Wake on Ring header

* Expansion Slots
- One 1x / 2x / 4x AGP v.2.0 slot
- Six 32-bit PCI v.2.2 compliant slots
- One 16-bit ISA slot (shared w/ a PCI slot)
- Total seven usable slots

* Integrated I/O
- One Floppy connector for up to two drives
- Two 9-pin 16550 UART Serial ports
- One 25-pin ECP / EPP Parallel port
- PS/2 Mouse & Keyboard ports
- Four USB ports (two headers via cable optional)

* Integrated Audio (optional)
- VIA VT82C686A Southbridge Digital
- Link Audio
- AC'97 Audio Codec
- Line-in, Line-out, Mic ports
- 4-pin CD-ROM audio header

* Integrated PCI IDE
- Dual channel master mode
- Supports four Enhanced IDE devices
- Support for PIO Mode 3/4, Ultra DMA
- 33 / 66 and ATAPI compliant devices

* Power Supply
- One 20-pin ATX power connector
- Input voltage -   90V to 130V at 60 Hz
- Output Wattage -  235W
- Output Voltage -  3.3V, +/- 5V, +/- 12V
- Backup Battery
-- 3.0V to 3.6V Cr2032 lithium
-- magnesium-oxide coin cell

* BIOS
- Award BIOS 2Mbit Flash RAM
- Supports APM & ACPI
- Auto detection of memory size
- Auto configuration of IDE hard disk types
- User settings of hardware monitoring
- Multiple boot options
- DMI 2.-0 / PC99 compliant

* Form Factor
- ATX 2.01  (12.0" x 8.2")
- 4-layer board
- Stacked Mouse / Keyboard ports
- Stacked (2) USB ports
- Stacked (2) Serial / (1) Parallel connectors
- Type "C" I/O Shield (Intel Caymen Compatible)

* Regulatory
- FCC DoC (Declaration of Conformity)
- European CE (Declaration of Conformity)