Trendnet TPE-102S PoE Splitter

Trendnet Updated: 2009-01-19 RSS
Trendnet TPE-102S PoE Splitter

TRENDnet's TPE-102S Power over Ethernet Splitter provides an innovative and cost effective solution to a variety of Ethernet devices such as VoIP phones or Wireless Access Points. Reduce costs by using existing CAT5 cable to deliver both power and data where power source is difficult to obtain.

Features

* IEEE 802.3af Power over Ethernet (PoE) Standard Compliant
* Support up to 11W at 5V DC or 12W at 12V DC
* Converts Non-PoE devices with Power Over Ethernet Support
* Advanced Auto-Sensing Algorithm enables the ability to draw power from 802.3af PSE (Power Source Equipment) Devices
* High Safety Standards with Short Circuit Protection
* Supports Power Detection and Classification
* Auto Disconnection for Over Voltage or Under Voltage Situation
* 5-year limited warranty

Standard: IEEE 802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE 802.3af Power over Ethernet
Network Media: 10Mbps: Cat 3,4,5 Unshielded/Shielded/Screened Cable 100Mbps: Cat 5, 5E, 6 Unshielded/Shielded/Screened Cable
Protocol: CSMA/CD
Topology: Star
Ports: 1 x PoE-IN Port (Data + Power)
1 x Data-OUT Port (Data only)
Switch: Switch between 5V and 12V
Power: DC Output 5V/2.2A or 12V/1A
Jumper Cable: 2.5mm / 0.1” Diameter on the Connector (Center Positive)
Diagnostic LEDs: Power In: 48V (Green)
Power Out: 5V (Green) / 12V (Amber)
Power Consumption: 15.4 watts (max)
Temperature: Operation: 0°C~40°C (32°F~ °F)
Storage: -10°C~70°C (°F~ °F)
Humidity: 10%- 90% (non-condensing)
Dimensions: 87 x 85 x 24mm (3.425 x 3.35 x 0.95 inches) (L x W x H)
Weight: 156g (0.35 lb)
Certification: FCC, CE