Yamaha YHT-30 Natural Sound One-Box Home Theater Audio System

YAMAHA Updated: 2007-10-10

ALL THE AUDIO EQUIPMENT NEEDED FOR SUPERB HOME THEATER IN A SINGLE BOX
Provides an easy way to purchase a home theater component system. The YHT-30 includes Yamaha's Classic Line CL-S100 speaker package of five identical NS-A425 speakers and an SW-3 subwoofer, plus Yamaha's R-V902 home theater receiver.

VERSATILE, POWERFUL RECEIVER
Powering this flagship system is Yamaha's R-V902 receiver providing 90 watts per channel to the front three channels and 35 watts to each of the rear speakers.

5-CHANNEL HOME THEATER RECEIVER WITH DOLBY PRO LOGIC AND CINEMA DSP
The R-V902 is a 5-channel receiver providing superb Pro Logic performance and processing and Yamaha's Digital Sound Field Processing, and Cinema DSP. And it has inputs that can accept the decoded output of a Dolby Digital decoder, such as Yamaha's DDP-1 or DDP-2.

DISCRETE POWER TRANSISTORS
Discrete power transistors rather than IC chips are used in the amplifier section to provide the cleanest sound possible. The amp delivers 90 watts each to the three front channels and 35 watts each to the rear surround channels.

ACCLAIMED YAMAHA IC CHIPS
Yamaha's YSS-203 chip provides Digital Dolby Pro Logic with full channel separation and no front-to-back bleedthrough as well as 35mm cinema DSP.

10 DSP/CINEMA DSP PROGRAMS -- INCLUDING 35mm MOVIE THEATER CINEMA DSP
Yamaha's exclusive Digital Sound Field Processing for music recreates the acoustic personalities of actual concert halls and other venues, such as the Roxy Theater in Los Angeles, Village Gate in New York, Anaheim Stadium, and concert halls and churches in Europe. 35mm Cinema DSP multiplies the effects of Dolby Pro Logic and Yamaha DSP to provide the best possible Pro Logic movie theater recreation in your home.

PRE-OUTS FOR ALL CHANNELS INCLUDING SUBWOOFER
Allows you to add outboard amplification and direct subwoofer connection.

NEW LEARNING AND PROGRAMMABLE REMOTE CONTROL
The advanced remote control with the R-V902 has learning capability and can be programmed for up to 13 macros, so it can perform a sequence of functions at the touch of a single button.

THREE AUDIO AND FOUR A/V INPUTS
The R-V902 is a versatile receiver incorporating three sets of audio-only inputs and four sets of A/V inputs. Includes one set of A/V inputs on the front panel for fast and easy connection.

LOW IMPEDANCE DRIVE CAPABILITY AND IMPEDANCE SWITCHING
Yamaha's famed low impedance drive circuitry is included in this receiver so that it can handle virtually all loads and a wide variety of speakers. For further speaker matching, the receiver's back-panel switches can be set for either 4 or 8 ohm main speakers and 4 or 6 ohm center and surround speakers.

LINEAR DAMPING FACTOR
The advantage of full range, 20 to 20 kHz, damping is that it improves the definition and resolution of the sound output throughout the audible frequency range.

DUAL CENTER CHANNEL OUTPUTS
You can easily add a second center channel speaker. This is especially convenient for large-room systems or for those using a big screen or projection TV.

BASS EXTENSION CONTROL
Accentuates the bass by adding a 7 dB boost at around 70 Hz.

A/B SPEAKER SELECTOR
Allows selection of either a first set of speakers or a second -- or both.

SLEEP TIMER
Permits a delayed receiver turn off. You can set it up for up to two hours in 30 minute increments.

40-STATION DIRECT ACCESS PRESET TUNING
Up to 40 preset AM and FM stations can be grouped in five groups of eight stations. These groupings make it easy for family members to easily access their favorite stations or to have musical genres, such as all the jazz stations, grouped together.

BINDING POST SPEAKER TERMINALS
Yamaha's heavy-duty binding post speaker terminals accept banana plugs, spade connectors, and a variety of speaker wire, including heavy gauge cable.

COMPLETE HOME THEATER SPEAKER ENSEMBLE
The six-speaker complement of the CL-S100 includes five identical Yamaha NS-A425 speakers providing the Main, Center, and Rear Effects channels, plus a Yamaha Active Servo Technology subwoofer, providing the low bass.

TIMBRE MATCHED
You are assured of complete timbre matching, because all speakers are identical, so they provide the same tonality. There is no chance that the bass response of one speaker will overpower another and unbalance the theatrical effect. Each two-way speaker delivers full-range frequency response from 60 to 22 kHz.
VERSATILE MOUNTING AND CONNECTION
For easy speaker placement, Yamaha's NS-A425s can be wall or shelf mounted vertically or horizontally. Five-way speaker binding posts make cable connection just as easy.

MAGNETIC SHIELDING
The NS-A425s are magnetically shielded, so they can be placed near or on a TV or video monitor without degrading the picture via stray magnetic fields.

DRAMATIC BASS
The low bass for the CL-S100 is provided by the Yamaha SW-3 Active Servo Technology subwoofer. It features a 10-inch driver and 100 watt amplifier to deliver the sonic punch needed for home theater.

SIGNAL SENSING
The subwoofer will automatically activate when its circuitry senses an audio signal and will turn off when the signal has ceased for several minutes.

DUAL INPUTS
Both high-and-low level inputs on the subwoofer provide easy interface to most amplifiers or receivers.