Toshiba NE-VS100D 1 Channel Video Decoder

Transmit data over distances far exceeding that of analog methods and without amplification using a SecurGen video decoder in conjunction with one of SecurGen's 1 or 4 channel video encoders. Link analog cameras to a remote VCR or monitor over a standard network without the need to run specialty cabling. The SecurGen decoder is a robust and versatile solution with the ability to output via either S-Video or BNC, perform 2-way audio transmission to a connected video encoder, and support bidirectional PTZ communication.

Features

* S-video output
* Analog CCTV monitor output
* Audio Out
* Connectivity via LAN
* No Signal Detection
* USB 2.0 Port Available for Data Storage
* NTSC/PAL Selectable
* LED Indicator
* RS485 Connection
* Small Form Factor
* Sleek Design
* Quick and Easy to Set-up
* Encoder Available for Digital Output
* Supports Dynamic IP, PPPoE, DHCP
* MPEG-2/4, MJPEG Multi Codec Compression Real Time Display

Specifications

System:
Operating System: Embedded Linux
Flash Memory: 32MB
Main Memory: SDRAM 32MB
CPU: 32 Bit RISC 200 MHz
Backup Storage Interface: USB2.0 Host
Software Upgrade: NAND Flash ROM, Remote upgrade over network
Configuration: Via Remote Software or Web browser, Built- in Web Server

Video:
Video Input: N/A
Video Output: 1 BNC composite (CVBS), 1Ch DIN jack SVHS
Compression Type: MPEG-2/4, MJPEG
Frame Rate (ntsc/pal): 30FPS@704X480/ 25FPS@704X576
Max Encoding Rate: 12Mbps
Resolution (ntsc): 704x480 / 352x240
Resolution (pal): 704x576 / 352x288

Network:
Network Protocol: TCP/IP, HTTP, SMPT, DHCP, PPoE, ICMP, ARP, RARP
LAN Port: RJ-45 Ethernet (10/100 Base-T)
Audio Output: 1Ch Speaker phone jack, Power Amp

Port & I/O:
RS232/RS485: Consol D-SUB9 connector/PTZ 2pin terminal block connector

Environment:
Power Usage: 5VDC 2.4A (1A for USB)
Dimensions: 120(W)X30(H)X98.2(D)
Humidity: 20 ~ 80%, atmospheric humidity
Certification: FCC, CE(LVD), CE (EMCD)