Tyan Transport GT28 B2935 Server

TYAN Updated: 2009-01-31 RSS
Tyan Transport GT28 B2935 Server

A high density dual platforms 4-way 1U server. This 2 node system, features up to (4) AMD Opteron Rev F 2000 series Dual Core/Quad-Core processor sockets, (32) DDR2 DIMM slots, (8) GbE LAN connectors, (2) PCI-E x8 expansion slot, an optional Infiniband connector and (4) hot-swappable SAS/SATA HDD bays. It's also equipped with a single 1000W high efficiency power supply, (2) M1003 control boards, and (8) counter-rotation fans with fan speed control. It's a perfect solution for web hosting, data center, and high-density environments.

Enclosure
- TYANR GT28 industry standard 19" rackmountable 1U chassis: (4) 3.5" hot-swap HDD bays for two nodes
- Dimension: H1.72" x W17.2" x D29.2"; H43.6mm x W436mm x D741.68mm

Processor
- Dual LGA 1207 sockets
- Support up to (2) 45nm Quad-Core AMD Opteron 2300 series processors
- Support 2.0GT/s HyperTransport link
- Support AMD Dual Dynamic Power Management (DDPM) feature

Chipset (per node)
- nVIDIA nForceR Professional 3600 (NFP 3600)
- SMSC SCH5017 Super I/O chip
- SMSC EMC6D103S Fan Control with PWM and Hardware Monitoring IC

Memory
- 128-bit dual channel memory bus
- (16) 240-pin DDR2 DIMM sockets
- Support memory speeds of 400/533/677/800 MHz
- Supports up to 64GB of Reg/ECC DDR2 memory
- Supports Single and Dual Rank memory

Expansion Slots
- (1) Low-Profile PCI-E x8 slot (via M2088-R)
- Total (1) expansion slot

Integrated 2D / 3D PCI Graphics (per node)
- XGI VolariTM Z9s graphic controller
- PCI interface
- 16MB DDR2 video frame buffer memory

Server Management
- Optional TYANR M3295-2/ M3296 SMDC
- IPMI v2.0 compliant

BIOS
- AMI BIOS on 8Mbit LPC Flash ROM
- Support ACPI 2.0
- Serial Console Redirect
- User configurable H/W monitoring
- PXE via Ethernet, USB device boot
- PnP, DMI 2.0, WfM 2.0 Power Management
- Multiple boot options
- 48-bit LBA support

Integrated LAN Controller (per node)
- (2) IntelR 82571EB dual-port GbE LAN controllers
- Total (4) RJ-45 LAN ports

Integrated InfiniBand Controller (B2935G28V4HI only)
- Mellanox InfiniHostTM III Lx MT25204A0-FCC-D (DDR)
- Total (1) InfiniBand 4X port with 20Gb/s link

Motherboard
- B2935G28V4H: TYANR S2935G4NR
- B2935G28V4HI: TYANR S2935G4NRI

Power Supply
- EPS1U 1000W PSU w/ PFC, 80-PLUS
- 100V~240V full-range AC input

Rear Panel I/O Ports
- (1) stacked 2-port USB 2.0 and 1-port RJ-45 connectors (dedicate for IPMI)
- (2) stacked 2-port RJ-45 connectors
- (1) InfiniBand CX4 connector (B2935G28V4HI only)
- (1) D-sub VGA port
- (1) DB-9 serial port

Front Panel Features
- I/O: (2) USB 2.0 ports
- LED indicators: Power LED; (2) LAN LEDs; (2) LAN LEDs; ID LED; Warning LED
- Switches: Power; Reset; ID; NMI

Storage (per node)
- Integrated SATA-II controller in NFP 3600
- (2) hot-swap 3.5" SATA-II HDDs w/ RAID 0, 1, 0+1, 5 support

System Cooling
- (6) 40mm x 40mm x 56mm 15,000rpm heavy-duty fans with fan speed monitor and control
- (2) 40mm x 40mm x 28mm 15,000rpm heavy-duty fans with fan speed monitor and control
- (2) Passive CPU heatsink