Tyan Transport TA26 B3892 Server

TYAN Updated: 2009-01-30 RSS
Tyan Transport TA26 B3892 Server

Built for departmental storage serving, the Transport TA26 (B3892) offers up to (8) SAS or SATA2 drive support with hot-swap capability. Other great features include support for up to (16) DDR DIMMs, built-in dual Gigabit network ports and integrated video, pre-installed DVD-ROM, single and redundant power supply options, support for multiple low-profile expansion cards, and much more.


- TYAN Thunder K8HM (S3892G3NR)
- Extended ATX footprint (12" x 13")

- Dual PGA 940-pin ZIF sockets
- Supports up to two AMD Opteron™ 200 series processors (including dual core processors)

- ServerWorks BCM5780 (HT2000) + BCM5785 (HT1000) chipset
- National PC87417 Super I/O chip

System Memory
- 128-bit dual channel memory bus
- Total of (16) 184-pin 1.8V DDR DIMM sockets (8 on CPU1 and 8 on CPU2)
- Up to 32GB of registered DDR 266/333 mem.
- Support ECC/non-ECC type memory modules

Expansion Slots
- (2) PCI-E x16 slots (each with x8 signal)
- (2) PCI-X 133/100 MHz slots
- (1) PCI-X 100 MHz slot
- (1) PCI 32-bit 33 MHz, v2.3 compliant slot
- (6) total PCI-X/E low profile cards supported
- (1) Tyan TARO™ SO-DIMM socket

Integrated Video
- ATI® ES1000 controller
- 32MB DDR frame buffer of video memory

Server Management
- Automatic fan speed control
- Chassis intrusion alert
- Support Tyan Server Management (TSM)
- Tyan SMDC M3291, IPMI v2.0 compliant remote server management kit (option)

Integrated LAN Controller
- Dual GbE LAN (from BCM5780): Embedded in BCM5780; Two 10/100/1000 RJ-45 LAN ports with LED
- One Intel® i82551QM fast Ethernet controller: One 10/100 RJ-45 LAN port with LED; Operating on 32bit/33 MHz PCI bus

- AMI® BIOS on 8Mbit LPC Flash ROM
- ACPI 2.0 and SRAT support
- PXE via Ethernet, USB device boot
- SMBIOS 2.3.1, BBS 1.1 compliant
- Headless Operation via serial console redirect
- 48-bit LBA Support


- Industry 2U rack-mountable chassis
- Storage bays: (8) 3.5" HDD bays; (1) slim line DVD-ROM bay
- Dimension: 26" (D) x 17" (W) x 3.5" (H)
- Dimension (mm): 660 (D) x 432 (W) x 88 (H)

Power Supply
- B3892T26V8H: EPS 12V, 2U, 600W with PFC
- B3892T26V8HR: 600W 1+1 redundant power

Back I/O Ports
- (1) PS/2 Mouse & (1) keyboard ports
- (2) USB 2.0 ports
- (1) 9-pin COM port
- (1) 15-pin VGA port
- (2) GbE and (1) FE RJ-45 LAN ports

Front Panel Features
- I/O: (2) USB 2.0 ports
- LED indicators: HDD Active LED, power LED, (3) LAN LEDs
- Switch: power, reset

Storage Controller
- Integrated 4-port SATA from BCM5785 supports up to 4 SATA-II drives
- Supports RAID 0, 1, 5, 10

Storage Backplane
- (1) 8-port SAS backplane, supporting up to 8 SAS HDDs or SATA HDDs (Note: it is required to install 3rd party add-on card or TYAN's TARO card M9000 to support 8 SAS or SATA HDDs. Add-on card is not shipped with the B3892T26V8H/R barebone)