Rosewill RU102 1000VA UPS

Rosewill Updated: 2009-01-05 RSS

* Advanced equipment & data protection from blackouts, brownouts, sags, AC line noise and surges.
* Full analytical high performance micro processor control with true RMS synchronous calculation.
* Intelligent battery management for battery status, prevent over charge & deep discharge for longevity battery performance.
* DC start up capability, complete diagnostic indication and control.
* Overload / Replace Battery / On Battery / On Line indication.
* Automatic Voltage Regulation (AVR, for 220V version only)
* Telephone RJ11 & Network RJ45 protection for 1000VA.
* Advanced UPS Software Management for 1000VA.
* USB communication interface for 1000VA.
* Smart Microprocessor Control.

Specifications

Model: RU102
Topology: Line Interactive
input Voltage Range: 96V ~ 138V, 174V ~ 262V
Input Frequency: 50/60 Hz ± 5Hz (auto sensing)
VA Rating: 1000VA
Watts: 500Watts
Output voltage: 120V,230V
Outlets:
120V Version:3 NEMA 5-15R outlets for Surge Protection & Battery Backup + 3 NEMA 5-15R outlets for Surge Protection (W/O AVR)
220V Version:1. IEC type outlets
3 IEC outlets for Surge Protection & Battery Backup + 3 IEC outlets for Surge Protection
2. Shuko type outlet
2 shuko outlets for Surge Protection & Battery Backup + 2 Shuko outlets for Surge Protection
Battery:
Battery Recharge Time:8 Hours typical, 12 Hours max
Battery Run Time:3~5mins on 500 watt load
About 7 mins on 300 watt load
Battery Replaceable: No
Note: 1.Battery can not be replaced by user.
2.The battery is charging when UPS works. If UPS did not work , it needs to be charged every 3 months.
interface protection: RJ11 & RJ45 (1 in / 1 out)
Surge Protection: 3 outlets for Surge Protection & Battery Backup + 3 outlets for Surge Protection
Dimentions: 7.09" x 5.98" x 9.45"