Tripp Lite SU10KRT3U SmartOnline Rack UPS

Tripp Lite Updated: 2009-01-27 RSS
Tripp Lite SU10KRT3U SmartOnline Rack UPS

Tripp Lite 10,000VA (10kVA) SmartOnline Rack/Tower UPS. The SmartOnline SU10KRT3U on-line, double conversion UPS protects server, networking or telecommunications equipment from blackouts, voltage fluctuations and surges in a compact tower/rackmount housing. In rack configuration, power module, step-down transformer and battery pack occupy only 3 rack spaces each (9U total). Upright tower placement of entire system supported with included tower stands. Large capacity 10,000VA/8,000W power module converts raw input AC to DC, then back to perfect sine wave AC output within 2% of 208V and 120V AC output voltages. Frequency regulation locks output power to 50/60Hz (+/-0.5 Hz), removing harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types. Perfectly regulated, continuous sine wave output with zero transfer time offers guaranteed compatibility with all equipment types. Hardwire input and output connections support a variety of permanent or PDU style power connections. Battery support can be extended through the addition of optional external 3U rackmount battery packs, sold separately (part# BP240V10RT3U). Includes slot for internal SNMP/Web card (part# SNMPWEBCARD), plus two DB9 enhanced serial and contact closure monitoring ports for unattended shutdown, remote control and monitoring of UPS system and power data.

* True on-line, double conversion UPS provides pure, sine wave AC output at all times
* Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time
* Removes harmonic distortion, electrical impulses, frequency variations and other hard to solve power problems
* 10,000VA/8,000W power capacity with hardwire input/output connections
* Accepts input voltages between 156 and 276, regulating output within 2% of 208V and 120V AC output
* Standard included 3U battery pack provides 10 minutes runtime at half load (5,000VA) and 4 minutes runtime at full load (10,000VA)
* Expandable runtime with multiple external battery packs, sold separately (part# BP240V10RT3U)
* Innovative design makes unit adaptable for rackmount, tower, or stacking applications
* In rack configuration, power module, step-down transformer and battery pack occupy only 3 rack spaces each (9U total)
* 2 DB9 serial ports for network interface; SNMP compatible
* Slot for optional SNMP/web card (part# SNMPWEBCARD)
* PowerAlert unattended shutdown software and 6 ft. network cable included
* Fault tolerant auto-bypass maintians continuous utility output to connected equipment, even in cases where the UPS is overloaded or suffers an internal failure that requires service
* Manual bypass switch on the transformer module allows users to disconnect, remove, and replace the power module while maintaining continuous utility power to connected equipment
* Diagnostic LEDs and LCD provide complete overview of operating conditions, UPS status and more
* Mounting hardware included with each 3U module for 4-post rackmount installation, 2-post telecom rack compatible with separate purchase of 2POSTRMKITWM accessory (3 required)
* Built-in Emergency Power Off (EPO) interface supports emergency shutoff in large facilities
* 2 year manufacturer's product warranty
* $250,000 Ultimate Lifetime connected equipment insurance


* Ideal for protection of critical 208V and 120V equipment in server rooms, internetworking closets and telecommunications systems in rackmount or tower applications. Common applications include corporate or departmental servers, workstations, hubs, routers, bridges, CAD/CAM workstations, concentrators, IP telephony and traditional PBX switching systems.

Package Includes

* SU10KRT3U UPS System (power module, hardwire PDU, step-down transformer module and battery pack)
* PowerAlert Software and cabling
* Mounting hardware for 4 post rackmount enclosures/tower stands
* Instruction manual with warranty information
* Flex conduit and wiring for connection between power module and transformer