Tripp Lite SU8000RT3UPM SmartOnline Power Module UPS

Tripp Lite Updated: 2009-01-27 RSS

8,000 VA (8kVA) on-line, double-conversion UPS power module for spare or redundant UPS configurations involving SU8000RT3U, SU8000RT3U1TF, SU7500RT3U or SU7500RT3U1TF UPS bundles. POWER MODULE ONLY.

Applications
* Power module can be configured for redundant or spare UPS applications involving SU8000RT3U, SU8000RT3U1TF, SU7500RT3U or SU7500RT3U1TF UPS bundles.

Package Includes
* SU8000RT3UPM POWER MODULE ONLY (3u)

SYSTEM OVERVIEW
Voltage compatibility: 208V AC (200/208/220/230/240v)
Frequency compatibility: 50/60 Hz
OUTPUT
Output VA: 8000
Output watts: 6400
Output nominal voltage: 208V AC (200/208/220/230/240v)
Output voltage regulation: Maintains pure sine wave output at all times, regulated within 2% of selected nominal output voltage, less than 3% total harmonic distortion when used with computer loads
Output frequency regulation: Regulates line frequency to 50/60Hz +/- 0.05Hz
Outlet quantity / type: -
INPUT
Maximum input amps: 200V - 38A / 208V - 36A / 220V - 34A / 230V - 33A / 240V - 32A
Input connection type: -
BATTERY
Full load runtime: n/a
Half load runtime: n/a
DC system voltage: 240V DC
VOLTAGE REGULATION
Voltage regulation description: On-line, double-conversion process give this UPS the ability to maintain output voltage within +/-2% of selected nominal voltage at all times
Overvoltage correction: Maintains continuous operation without using battery power during overvoltages to 276V AC, regulating output within 2% of selected nominal
Brownout correction: Maintains continuous operation without using battery power during brownout / undervoltage conditions to 156V AC, regulating output within 2% of selected nominal
LEDS ALARMS & SWITCHES
Front panel LEDs: 6 LED DISPLAY: line power, bypass, inverter, charger, output AC and battery operation. LED/LCD display panel easily rotates for viewing in rackmount or tower configurations.
Alarms: Multi-function audible alarm offers notification of UPS start, backup operation, low battery, overload, UPS fault, inverter fault, DC bus fault, overtemperature, remote shutdown, shutdown imminent and shutdown complete
Switches: Includes main power off/on switch, plus 2 switches to set and execute scrollable LCD functions
SURGE / NOISE SUPPRESSION
AC suppression response time: Instantaneous
EMI / RFI AC noise suppression: Yes
PHYSICAL
Shipping weight (lbs): 91.6
Shipping weight (kg): 41.6
Shipping Dimensions (HWD/in): 11.25 x 31.5 x 23
Shipping Dimensions (HWD/cm): 28.6 x 80 x 58.4
Unit weight (lbs): 57.2
Unit weight (kg): 26
Unit Dimensions (HWD/in): 5.25 x 17.5 x 26
Unit Dimensions (HWD/cm): 13.3 x 44.4 x 66
Material of construction: Steel
Form factors supported: Rack (3U)
Cooling method: Fan
ENVIRONMENTAL
Operating Temperature: +32 to +104 degrees Fahrenheit
Storage Temperature: +5 to +122 degrees Fahrenheit
Relative Humidity: 0 to 95%, non-condensing
COMMUNICATIONS
Network monitoring port: Includes 2 built-in DB9 monitoring ports (1-RS232 / 1-contact closure)
Software and cabling included: Includes PowerAlert UPS monitoring software for all common network and standalone operating systems. Cabling included.
SNMP compatibility: Built-in accessory slot accommodates internal SNMP / Web card and other network accessories
WatchDog compatibility: Yes, compatible with Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot of application / OS or hard power off/on reboot of connected equipment—ideal for unattended kiosk applications
LINE / BATTERY TRANSFER
Transfer time from line power to battery mode: Zero, online UPS continuously converts incoming AC to DC, then back to AC. When line power is interrupted, UPS maintains continuous output from battery reserves with absolutely no disruption in output AC power.
Low voltage transfer to battery power: Maintains continuous operation during undervoltages as low as 156VAC. Below this point, output is maintained utilizing battery reserves.
High voltage transfer to battery power: Maintains continuous operation during overvoltages to 276V AC. Above this point, output is maintained utilizing battery reserves.
SPECIAL FEATURES
EPO port: Includes dedicated EPO (emergency power off) interface and cabling
Cold Start: Yes, inverter can be "cold started" to enable temporary AC output during a power failure
Appearance: Attractive all-black color scheme
CERTIFICATIONS
Certifications: Tested to UL1778 (USA), CSA C22.2 No. 107.3 (Canada), CE (European Union), NOM (Mexico), Class A (Emissions), RoHS compliant
WARRANTY
Product warranty: 2 year product warranty