Olympus Nortec 1700 Conductivity Gauge

Olympus Updated: 2007-09-11
Olympus Nortec 1700 Conductivity Gauge

The Nortec® 1700 is designed for the customer that requires conductivity testing only.

Specifications:lawMaster™ is a Microsoft® Windows® 98/Me/NT/2000/XP program, which provides a user-friendly interface for communications between the flaw detector and an IBM compatible PC. A-Scans, instrument settings, thickness readings, and report contents are all available for review, archiving, uploading and downloading.

* 60 or 480 KHz operation
* 0.9 - 110% IACS
* 0.0 - 0.025 inch non-conductive thickness readings
* Large selection of probe configurations with reject LEDs
* Fast, simplified sorting of metal alloys
* Verification of aluminum heat treatment
* Interchangeable probes require no factory calibration of instrument to probes

The Nortec® 1700 replaces the original Nortec® 17, once the standard in conductivity testing. Once setup is complete, alloys and heat-treated conditions or paint thickness can be checked automatically using the instrument's Go/No-Go alarm.

NORTEC® 1700 Technical Specifications
Conductivity Range: Digital conductivity display from 0.9% to 110% IACS. (International Annealed Copper Standard)

Accuracy: Within ± 0.5% IACS from 0.9% to 62% IACS and within ± 1% of values over 62%. Meets BAC 5651. Conductivity measurements with greater than 10 mils of lift-off have reduced accuracy.

Non-Conductive Coating Thickness: Can measure non-conductive coating thickness from 0.00" to 0.025". Accuracy of ± 0.001" over 0.00" to 0.015" range.

Alarms: Independent high and low limit alarms can be set for conductivity and lift-off. The alarms can be set to trigger when values are inside the limits (positive) or outside the limits (negative).

PowerLink™: Automatic probe recognition.