Mitsubishi VS-50XLWF50U Front Access Lamp Changer Projection Cube

Mitsubishi Updated: 2009-04-14 RSS
Mitsubishi VS-50XLWF50U Front Access Lamp Changer Projection Cube

Mitsubishi's VS-50XLWF50U Projection Cube with front access and integrated lamp changer is the ideal choice when your mission critical application requires a space-saving data display wall or video monitoring system. The unique front access mechanism allows the display cubes to be placed against a wall, eliminating the need for service access space behind the display. And the automatic lamp changer provides additional reliability for your display wall. The cube will sense a lamp failure or pre-determined degeneration of brightness and automatically switch to a spare lamp already installed in the light engine, displaying an image just 7 seconds after initiating the lamp switch.

The 50" XGA VS-50XLWF50U Projection Cube is also designed for 24 hour, 7 day a week operation, displaying your data clearly with Mitsubishi's durable DLP® light engine. Proprietary Mitsubishi features ensure that the cubes in the display wall will maintain uniform brightness and color throughout the video monitoring system.

Mitsubishi's Dynamic Brightness Balancing™ feature monitors the brightness in each and every cube, adjusting them individually as required to ensure equal brightness on the display. Smart Lamp™ and Smart Colorwheel™ maintain color uniformity on every VS-50XLWF50U Projection Cube in the video monitoring system. Each lamp and color wheel stores its own color characteristics internally, and when either is replaced the function activates recalibrating the cube into perfect color balance with the display wall.

Installation and service time can be greatly reduced through the optional motorized adjustment tool. It allows remotely operated mechanical adjustments to the image geometry. This time-saving device enables a single technician to make the slightest adjustments to the 6-axis adjuster, creating precise image alignment between the display wall cubes.

Display Technology: DLP® chip (0.7", 12° single chip)
Brightness: Bright: 1000 cd/m² (typical); 292 ft.-L (typical);
Normal: 800 cd/m² (typical); 234 ft.-L (typical)
Light Output: Bright: 700 ANSI Lumens; Normal: 560 ANSI Lumens
Native Resolution: 1024 x 768 pixels (XGA)
Screen Size: 50" diagonal viewable (1270 mm)
Contrast Ratio: 1600:1 (typical)
Pixel Clock Rate: 25 - 122 MHz
Viewing Angle: Horizontal: 160°; Vertical: 60°(typical)
Mullion Size: 0.2 mm - 1.0 mm (*)

RGB Input Scanning Frequency: VGA (640x480) - SXGA+ (1400x1050); Horizontal: 31.5 - 78.0 kHz; Vertical: 49 - 85 Hz
Analog RGB Input Signal: 5 BNC (RGBHV) x1; Video: 0.7Vp-p positive/75 ohms; Synchronous: TTL level (positive/negative); High Level: 2.5-5.0V; Low Level: 0-0.5V; Sync On Green: Video: 0.7Vp-p positive; Synchronous: 0.3Vp-p negative
Digital RGB Input Signal: TMDS (DVI-D) x1
Control Signal Input: RS-232C: D-Sub 9 pins; D-Sub 9 pins x 2 (input, output) Mitsubishi original control link;
Wired Remote: F3.5 Jack; IR Receiver

Lamp Type: High pressure mercury lamp 100W/120W
Lamp Life: 10,000 hours/6,000 hours

Weight: 187 lbs. (85 kg)
Dimensions (WxHxD): 40.03 x 38.7 x 26" (1017 x 982.5 x 660 mm)
Power Consumption: 195/195W
Voltage Range: AC 100-240V ±10%, 50/60Hz ±1 Hz
Thermal Dissipation: 167.7 kcal/h (665.5 BTU/h)

Copyright 2011 GeneralManual.Com. All Rights Reserved. Products and names mentioned are the property of their respective owners. Privacy Policy RSS
This page is part of GeneralManual.Com Network Mitsubishi VS-50XLWF50U Front Access Lamp Changer Projection Cube User Manual.